美国耶拿(美国UVP)B-100AP高强度紫外线灯

美国耶拿(美国UVP)B-100AP高强度紫外线灯

上海峰志仪器有限公司代理美国耶拿（原美国UVP公司）生产的便携式高强度紫外线灯B-100AP和便携式黄绿光表面检查灯B-100YP，现针对上海地区终端客户提供免费演示活动，详情请联系上海峰志仪器有限公司。

B-100AP系列高强度紫外线灯配有耐热塑料（Cool-Touch）外壳，无论灯管运行多长时间，用户都可以操作灯头，非“P”型号采用铝制灯头制造，型号（B-100SP 除外）均标配 100 瓦点灯泡;灯泡的额定寿命为 5000 小时，B-100SP 随附的自镇流灯泡的平均寿命为 450 至 2000 小时，具体取决于使用模式，灯头连接到变压器底座，免提使用（B-100SP 除外的型号），允许灯头旋转 360°;从底座上取下 lamp 以增加移动性

UVP Blak-Ray B-100 系列高功率紫外线灯提供明亮的辐照度，以实现佳荧光。B-100AP 灯放置在变压器底座中，无需手动操作。

B-100AP 和 B-100AP/R

B-100AP 型号具有 100 瓦长波紫外线、冷触感外壳和镇流器底座。在 18 英寸处。（457 毫米），该灯产生约 5 英寸的高强度紫外线辐照度中心。直径（127 毫米）。灯头在安装到底座上时可以旋转 360 度，无需手动操作，或者可以从底座上取下灯。8 英尺初级和次级电源线。为了增加移动性，请选择 B-100AP/R，其中包括 20 英尺（6.1 米）的主线和辅助线。这些灯的用途包括无损检测和荧光检测。

B-100A 和 A-100AR

长波 B-100A 采用防刮铝制外壳制造，该外壳通过 8 英尺长的绳索连接到镇流器底座;包括 8 英尺辅助电源线。100 瓦长波紫外灯泡非常适合检测应用。为了增加移动性，请选择 B-100AR，其中包括 20 英尺（6.1 米）的主线和辅助线。这些灯的用途包括无损检测和荧光检测。

B-100SP

这款 90 瓦长波自镇流灯是一款高度便携的高强度灯，适用于汽车泄漏检测应用。镇流器直接内置在灯泡中。B-100SP 具有 Cool-Touch 外壳和 8 英尺（2.44 米）的电源线。

B-100Y 和 B-100YP

这些型号具有黄色滤光片，可阻挡短于 500 nm 的波长，并在 543、574 和 576 nm 处产生三条强汞谱线。产生高对比度的光用于细小的表面颗粒检测。使用此灯通常可以看到小至 10 微米的颗粒。B-100Y采用铝制外壳，B-100YP采用塑料外壳。这些灯非常适合半导体晶圆检测，因为大多数光刻胶吸收发生在 450 nm 以下。

UVP High Intensity UV Lamps

The UVP Blak-Ray B-100 Series high powered UV lamps offer brilliant irradiance for optimum fluorescence. The B-100AP lamp is placed in the transformer base for hands-free operation.

B-100AP and B-100AP/R

B-100AP models feature 100 watt longwave UV, Cool-Touch housing and ballast base. At 18 in. (457 mm), the lamp produces a highly intense center of UV irradiance about 5 in. (127 mm) in diameter. Lamp head can rotate 360 degrees when attached to the base for hands-free operation or lamp can be removed from the base. 8 ft primary and secondary cords. For added mobility, select the B-100AP/R which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.

B-100A and A-100AR

The longwave B-100A is manufactured with a scratch-resistant aluminum housing which connects to ballast base with an 8 foot cord; 8 foot secondary cord is included. The 100 watt longwave UV bulb is excellent for inspection applications. For increased mobility, select the B-100AR which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.

B-100SP

This 90 watt longwave, self-ballasted lamp is a highly portable, high intensity lamp for automotive leak detection applications. The ballast is built directly into the bulb. The B-100SP features the Cool-Touch housing and an 8 ft. (2.44m) cord.

B-100Y and B-100YP

These models feature a yellow filter which blocks wavelengths shorter than 500 nm and produces three strong mercury lines at 543, 574 and 576 nm. The high contrast light is produced for fine surface particle detection. Particles down to 10 microns are routinely visible with this lamp. The B-100Y is built with aluminum housing and the B-100YP with a plastic housing. These lamps are excellent for semiconductor wafer inspection as most photoresist absorption occurs below 450 nm.

Applications include:

Fluorescence Inspections

Non Destructive Testing

Leak Detection

Readmission

*Product performance and effectiveness will depend on the user.*